Eco
One Instructions from the Spa Specialist
Step
One:
1
Remove filters
from the filter housing (deep clean them and sanitize or use new
filters). If your spa water is clean then do not drain. If you have
been using the water and or have bromine in it, drain and start
with fresh water. When filling a spa make sure not to use a
water softener. Add one bottle of "Step One". Over fill the
spa to make sure the cleaner gets in all parts.
2
With
all blowers and jets on full, let Step 1 circulate at least 30
minutes per a day, for 10 days.
3
After 10 days,
drain the spa and clean out all the old water. Fill spa and insert
filters. Once water is up to temperature add one bottle of Spa
Treatment. (large spas add two)
4
Repeat Step one
(do not drain) every six months 2 days before draining your old
water. Simply pour it into the water 2 days before you drain and
let it circulate.
5
Add
filter booster. Per instructions on bottle. Two capfuls by the
fiter.
Weekly:
1
Check pH and
Total Alkalinity make any necessary adjustments.
PH = 7.8 to 8.4
, 8.2 aim. TA = 80 to 120
Monthly:
1
Clean filters
with high-pressured water, soak in water (1 Gal. to 1/4 cup) bleach
solution ten minutes. Insert clean filters and add 2 capfuls of the
filter booster near filter housing while running.
2
Add
one bottle of the Eco One Treatment
Six
Months:
1
Deep
clean the filters and put the clean ones in the spa.
Follow the
instruction on the ionizer
page at the bottom
for six months.
Anytime:
Anytime that you
may find that your water is hazy add 1 teaspoon
Chlorine and 1 tablespoon of shock.
Notes: Do not use bromine. Do not use any clarifiers, and Spa
Defender or other chemicals with Eco One. If you have questions
please call or email for help. Info@spaspecialist.com.
We do not recommend using any of the oil based fragrances. You can
use the powdered ones.